Generac GNC-QT15068C 150kW 3,600-Rpm Commercial Series Aluminum Enclosed Generator
$10,453.95
- Brand: Generac
- Product Code: MMFS-039761
- Availability: In Stock
FEATURES :
- SCAQMD Compliant
- Innovative design and prototype testing are key components ofgenerac's success in "improving power by design." but it doesn't stop there. Total commitment to component testing, reliability testing, environmental testing, destruction and life testing, plus testing to applicable CSA, NEMA, EGSA, and other standards, allows you to choose generac power systems with t
- Solid-state, frequency compensated voltage regulation.Thisstate-of-the-art power maximizing regulation system is standard on all generac models. It provides optimized fast response to changing load conditions and maximum motor starting capability by electronically torque-matching the surge loads to the engine. Digital voltage regulation at +-1%.
- Single source service response from generac's extensive dealer network provides parts and service know-how for the entire unit, from the engine to the smallest electronic component.
- Generac transfer switches. Long life and reliability are synonymous with generac power systems. One reason for this confidence is that the generac product line includes its own transfer systems and controls for total system compatibility.
WHAT'S IN THE BOX :
- QT15068C Commercial 150kW Generator
- Two Line LCD Tri-Lingual Digital Nexus Controller
- Isochronous Electronic Governor
- Sound Attenuated Enclosure
- Closed Coolant Recovery System
- Smart Battery Charger
- UV/Ozone Resistant Hoses
- Owner's Manual
WARRANTY :
- 2-Year Limited Factory Warranty
- 30 Day Satisfaction Guaranteed
SPECIFICATIONS :
| Power Output | 150kW |
| Type | Synchronous |
| Rotor Insulation Class | H |
| Stator Insulation Class | H |
| Telephone Interference Factor (TIF) | Less than 50 |
| Alternator Output Leads 1-Phase | 4 wire |
| Alternator Output Leads 3-Phase | 6 wire |
| Bearings | Sealed Ball |
| Coupling | Flexible Disc |
| Excitation System | Brushless |
| Voltage Regulation | |
|---|---|
| Type | Electronic |
| Sensing | Single Phase |
| Regulation | +/- 1% |
| Governor Specifications | |
| Type | Electronic |
| Frequency Regulation | Isochronous |
| Steady State Regulation | +/- 0.25% |
| Electrical System | |
| Battery Charge Alternator | 12 Volt 30 Amp |
| Static Battery Charger | 2 Amp |
| Recommended Battery | Group 24F, 525 CCA |
| System Voltage | 12 Volts |
| Engine Specifications | |
| Model | V-Type |
| Cylinders | 10 |
| Displacement (Liters) | 6.8 |
| Bore (in/mm) | 3.55/90.2 |
| Stroke (in/mm) | 4.17/105.9 |
| Compression Ratio | 9:1 |
| Intake Air System | Naturally Aspirated |
| Lifter Type | Hydraulic |
| Engine Lubrication System | |
| Oil Pump Type | Gear |
| Oil Filter Type | Full flow spin-on cartridge |
| Crankcase Capacity (qt/l) | 5/4.7 |
| Engine Cooling System | |
| Type | Closed |
| Water Pump | Belt driven |
| Fan Speed (rpm) | 2200 |
| Fan Diameter (in/mm) | 26/660.4 |
| Fan Mode | Puller |
| Fuel System | |
| Fuel Type | Natural gas, propane vapor |
| Carburetor | Down Draft |
| Secondary Fuel Regulator | Standard |
| Fuel Shut Off Solenoid | Standard |
| Operating Fuel Pressure | 11-14" water column/21-26 mm HG |